Xtractor Vent® X18 Xtra Ridge Vent
Xtractor Vent® X18 externally baffled, shingle over ridge vent offers maximum roof ventilation – 18 square inches of net free area per linear foot – for ultimate protection from heat and moisture. X18 Xtra combines our already exceptional X18 sectional ridge vent with a filter for extra protection against weather infiltration.
- Internal filter for extra protection against extreme weather
- Integrated end plugs throughout for structural integrity and to reduce scrap
- Pre-drilled nail holes for proper fastening of vent
- Embossed nail lines for correct nail placement and an embossed center line for proper alignment on the ridge
- External and internal baffles prevent wind-driven rain and snow infiltration
- Narrow 1/8 inch wide vent holes
- Compression resistant design
- Maximum ventilation – 18 square inches of net free area per linear foot
- Hot Dipped Galvanized ring shank nails included
Calculate how much you need with our Ridge Vent Calculator
Net Free Area
18 in²/lin ft
Width
14 3/4 in
Length
4 ft sections
Thickness
13/16 in
Patents
6,277,024 US and 2,327,795 CAN
Installation Instructions
Product Literature
Warranty Information
Testing & Certifications
Featured Builder
Rainscreens 101 with Sweenor Builders
Goes without saying, water is our enemy…when it comes to building. This relentless culprit is the number one killer of buildings and cause of failures. So, proper moisture management is an absolute must.